Securely Holds Even Large Housings
The packaged Panhead Adapter Base assures secure installation of a camera housing on the pan-head with two screws without rattling or loosening (*1).
The optional Quick Shoe W50 Set which adopts Arca-Swiss system widely used for tripods enables you to attach and detach a housing more easily and quickly with the same solid holding power (*2).
(*1) Compatible with tripod screw holes (1/4 inch) with 33 to 80 mm/1.3 to 3.1 inch center-to-center distance on the bottom of the housing.
(*2) Compatible with tripod screw holes (1/4 inch) with center-to-center distance of 20 to 36 mm/0.8 to 1.4 inch on the bottom of the housing. For a housing with wider tripod screw hole spacing, a combination of the "Quick Shoe W95 Plate" and "Quick Shoe W50 Clamp" is available.
Underwater Weight: approx. 250g / 8.8oz
Dimensions: 170 x 90 x 180mm / 6.7 x 3.5 x 7.1in
Weight: 476g / 16.8oz
Having UW Tripod Hub as a fundamental part, this newly designed underwater tripod system offers wide variety of configurations of "pan-head parts" and "tripod legs". In addition to use on land and in freshwater, whole system is usable in saltwater thanks to specially selected material, surface finishing and assembling method. (*1)
(*1) After using, make sure to rinse the product in fresh water to dissolve salt deposit and apply grease according to respective user manuals.
Download Specifications with Different Arms 
Three Opening Angles
Each leg mount is equipped with a "Lock Lever" to lock leg position at either of [high], [middle] or [low] positions. Each leg can be set to different opening angles to make an elevator column vertical even in uneven or rough sea ground. Friction when opening/closing legs can be adjusted by tightening/loosening fixing bolts on joints.
Center Column Type Elevator
The center column type elevator consists of two parts. Removing lower elevator enables to put combined camera position down close to the ground when opening angle is set to low position. Remove the Lower Elevator Column You can get lower height. Extra "Lower Elevator" can be jointed on the original Lower Elevator to extend total height at 145mm/5.7in. It is also possible to hang down a camera system by attaching the elevator upside-down for extremely low angle shooting or shooting a subject just underneath of the tripod.
2-Way Ferrule (rubber/spike)
Bundled "2-Way Ferrule" offers two configurations either rubber or spike tip. Ferrules are to be screwed on ball-joints on tripod leg edges. Turning rubber parts upwards will have spike tips to accommodate to different circumstances.
More Stability with Weight
There are several options to enhance stability of the tripod system including hanging a dive weight from the strap hole or jointing a dive weight by using a ball-joint on a tripod leg besides using a stone bag.
Featured products
Onsale Products
